| Message Capability: | 1 or 2 messages, selectable, accessed 1 at a time
|
| Audio Inputs-Line Level: | 230mV p-p (-20dBm) sensitivity, 10k impedance, adjustable
|
| Audio Inputs-Mic Level: | 5mV p-p (-53dBm) sensitivity, unbalanced, 30 dB gain, 3.5mm jack
|
| Audio Processing: | On-board variable slope compression/expansion
|
| Audio/Anti-Alias Filters: | 8th Order Butterworth-type
|
| Dynamic Range: | 70+dB
|
| Audio Output-A: | 6 watt nom / 2.2 watt true RMS speaker level, bridged, adjustable
|
| Audio Output-B: | 6 watt as above, user configurable to 200mV Line Level
|
| LED Outputs (2): | 5 volt 5mA sourcing, active on playback, one per message
|
| Memory Type: | 128mbit / 16MB non-volatile NAND Flash EEPROM
|
| Memory Backup: | NOT REQUIRED, non-volatile
|
| A/D Conversion: | Companded 8 Bit Linear, real time streaming
|
| Indicators: | VU Level on Rec/PB, PowerSaver Status, Play Status, Record Status
|
| Start Inputs, S1, S2: | Momentary dry contact closure for single play, sustained for continuous play
|
| Inputs: | Configurable for interruptible/non-interruptible modes
|
| PowerSaver Capability: | selectable on/off, proprietary auto-standby mode for remote power systems
|
| Power Consumption: | 60mA @ 12 VDC (typical, average), 140 microamps standby in PowerSaver mode
|
| Power Supply: | 12 VDC output nominal @ 1000 mA, 120 VAC source
|
| Approvals: | Class II Device, CSA, UL, FCC CLASS A Compliant
|
| Construction Standard: | Industrial/Commercial, carbon steel enclosure, polyester finish
|
| Operating Temp/Humid: | -20°F to +130°F (-30°C to +55°C), non-condensing
|
| Dimensions, Weight: | 5.0"w x6.0"d x 0.75"h, 2.0 lbs (130mm x 152mm x 19mm, 0.9 kg)
|
| Warranty: | 5 year ‘Gold Seal’ manufacturer direct
|
| Includes: | 12VDC Power Supply, Set of Audio Patch Cords, Detailed Operating Instructions
|
