Frequency Response:	20Hz-20kHz +1/-5 dB
S/N Ratio, Dynamic Range:	75dB (compressor bypassed), 82dB (compressor enabled)
Audio Input (Line In):	-13dBm to +8dBm(170mV to 2.0V RMS), single ended or differential
User Controls:	Input, minimum, and master volumes; RUN/TEST mode, sensor sensitivity, switchable input compressor, AUTO SETUP
Indicators:	Input and Sensor VU’s, RUN/TEST status, main and sensor POWER status
Audio Sensor:	Condenser type, includes line drive amplifier and feedback suppression filters
Acoustic Mapping:	full scale sweep response performed during AUTO SETUP, 8 bit microprocessor, flash storage, self test routines
Audio Output:	6 watts @4 ohms, 2 to 8 ohm nominal, overload protected, includes line out
Output Attenuation:	-32dB max,adjustable, at both speaker and line outputs
Connections:	Line in, line out, speaker out, power and ext. sensor (via 4 pin ejection header)
Output Tracking:	10ms attack resp., linear tracking, max 32dB atten., max decay = -2dB/s
Power Consumption:	500 mA @12 VDC (typical, average)
Construction Standard:	Industrial/Commercial, carbon steel enclosure, polyester powdercoat
Operating Temp:	-20°F to +130°F (-30°C to +55°C)
Dimensions, Weight:	3.5"w x6.0"d x0.9h, 1.5lb (8.9w x15.2d x2.3h cm, 0.7kg)
Warranty:	5 year Gold Seal Warranty
Includes:	12VDC power supply, Audio Sensor w/ mounting hardware, audio patch cords and connectors